HueForge Car Picture (Espace IV)

This is the beggining of a new series of mine.

I recently started playing around with HueForge and to be hones the results are stunning. Unfortunately the photos I managed to take can't really show the result, so please consider giving it a try.

Feel free to make suggestion for next car in the comments.

Instructions:

Project: Espace_IV

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.12mm

The Model is 200x133.33mm in size

You may print at higher layer heights below the Base Thickness of 0.24mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 2.48mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #00358e PLA BambuLab Basic Blue  Transmission Distance: 4
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
    #ff7900 PLA Kexcelled Light Orange  Transmission Distance: 8
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.64mm) swap to Blue
    At layer #16 (1.28mm) swap to Jade White
    At layer #19 (1.52mm) swap to Blue
    At layer #23 (1.84mm) swap to Light Orange
    At layer #25 (2.08mm) swap to Jade White for the rest.