Big tilt box with modular insert / Organizer

Hello! 

 

Now you can print a big tilt box with modular insert.

It is the same casing as https://makerworld.com/en/models/2128036-big-tilt-box-big-tilt-box-wall-mount#profileId-2304120

 

The dividers high is 128mm.

It is necessary to print the “dividers with holder” in the vertical axis.

So I cutting the high of the dividers on the half.

It is easier to print.

You print two dividers with holders by one print. (2x64mm = 128mm)

The dividers without holders are easy to print.

 

I have used colors for the dividers: 

Green is for the horizontal way. 

Red is for the vertical way.

 

The easiest way to customized the insert is use: 

 

or

 

 

 

If you need more customized you have follow dividers: 

 

For the horizontal way (Green): 

Dividers with holders:

Dividers horizontal without holders: 

(The "Dividers_horizontal_simple_4 is not on the picture)

 

For the vertical way (red):

Dividers with holders: 

Dividers without holders:

 

Example: 

• 1x Dividers_horizontal_4 (2x65mm)  (green and with holders)
• 2x Dividers_horizontal_simple_1       (green and without holders)
• 1x Dividers_vertical_3 (2x65mm)       (red and with holders)
• 1x Dividers_vertical_simple_3            (red and without holders)

 

 

 

Boost MeI would appreciate a comment and a picture of your print.

Thank you for boost me :)