240mm Lightbox Back and Stand for MZIP Lightboxes

This is the back and optional base for my 240mm diameter lightboxes. It can be used as a wall hang using the built in hanging provision, or as a desk or shelf display using the stand. There is also a fancy stand for the lightbox back that has a removable/customizable faceplate and provision for a power jack in back here: https://makerworld.com/en/models/2147170-240mm-base-w-power-jack-and-separate-front-plate

The 240mm round lenses are all interchangeable. You can change them up as desired. Note that any protrusions like the bunny ears on Blaze Rabbit require it to have a custom back.

Note On Commercial Use: You may print and sell prints of this design with no license fee as long as it is used only with my lens designs. Nobody is allowed to redistribute the actual files used to create this model.

Parts I used:

The base is attached to the lightbox back with 2 each M4x18 or M4x20 screws.

RF LED Strip Light Dimmer, Amazon.com ASIN B0C58VYTFD

LED strip: USB LED Strip Light Cool White 6000K 5V USB Powered 13.12ft/4M 240LEDs Flexible SMD2835 High Brightness No-Waterproof IP20 LED Tape Lights(2pcs x 6.6ft) ASIN B08M65DKZ7

You can also use Bambu striplight sets if you prefer. Some of this new series of art designs can be printed in just black and white and use an RGB strip to set whatever color illumination you want.

5-24V DC power supply (if you use the LED Strip Light Dimmer above)

Clear or black silicone seal to attach the lens to the lightbox back