P1S Build Plate Handle

I used OP's model and it did the job but it needed some work. It hits the glass, its loose in the build plate cut outs , plate radius was off, But worked for a month and kept my fingers from slobing up my build plate. Even after cutting the circle and just riveting it together it work for about a month before I decided to fix it. Thanks to OP for providing the step file. I did the same. 

I used a .6 nozzle because Id rather do a little post then clog a nozzle with near 300C filament. Bambu PET-CF is my go to.

Made 4 versions, 2 Rivet type and 2 M3 Button Type. OPs was hitting my silicone nozzle cover, so reduced the profile height and added 2 versions if you are worried about the silicone brushing the grip. 

4 - M3 x 4mm Button Head Screws w/ M3 nuts

or

4 - ¼" long by 1/8" diameter Rivets (my preferred.)