Crystal Summit Desk Lamp

🏔️ Crystal Summit Desk Lamp

Important Print Note — Please Read!
During the upload process, I encountered a slicing timeout error, so I had to upload the model with a 0.24 mm layer height. For this model, I actually recommend using 0.20 mm, as it will deliver higher-quality results. Please keep this in mind!

🔹 Cinematic Mountain Light Sculpture

This is more than just a lamp — it is an unexplored summit rising on your desk.
The Crystal Summit Desk Lamp is designed to bring the tranquility of nature and the majestic presence of mountain peaks into your workspace.

💎 When the Light is Off

Its detailed surface stands like a modern sculpture; the crystalline form gives it a decorative presence even without illumination.

🌄 When the Light is On

Glacial blue, volcanic red, or sunrise yellow…
The atmosphere is entirely shaped by the light you choose.
As the light flows through the topographic layers, it creates a striking mountain silhouette.

🧊 Technical Specs & Print Recommendations

• 🧵 Material: PLA
• 🛠️ Supports: Definitely required!
  Some sharp overhangs and upper angles print much cleaner with support.
• 🌀 Brim: Not necessary if your bed adhesion is reliable;
  otherwise, a 5 mm brim is recommended for extra security.

💡 Lighting

The bottom section is fully compatible with the Bambu LED Kit.
Alternatively, you can use a simple LED strip setup.

⚠️ To prevent light leakage from the base, it is strongly recommended to print the bottom part in a dark filament, preferably black.