I wanted to store a hose or two in the rafters this winter. I made a remix of TeknikFrik's (Printables.com) model to add 2x6 rafter hook mounting option. I also made a version with an extra length hose hook for multiple hoses / extra large hose.
If using STLs, here are the print settings that worked for me:
- Filament: PETG / ABS / ASA for anywhere that may get hot. PLA may be fine for cooler climates - however I did not test PLA.
- Nozzle: 0.4
- Layer Height: 0.28mm
- Wall loops: 4 (Add extra wall loop for extended version)
- Top/bottom shell layers: 5
- Sparse Infill: 50% Adaptive Cubic
- Supports: None
- Bed Adhesion: Mouse Ears, at least 8mm brim width on ears. Could also benefit from a full brim if your build plate adhesion is typically a struggle. The narrow part furthest from the rafter is where I experienced the most warping.
Boost MeSupporting me helps fuel further models / remixes. Thank you!
ADubs1995
