Torch Of The Upside Down - Stranger Things

Step into Vecna’s Realm with the Torch Of The Upside Down! Crowned with a frightening Demogorgon inspired head and designed to look as if it’s been pulled straight from the Upside Down, the torch glows with a rechargeable LED flame bulb that casts an eerie, flickering light. When not in hand, it mounts to the wall on a tentacle holder, transforming it into a bold piece of display art. Perfect for fans of Stranger Things and supernatural décor, this torch brings otherworldly atmosphere to any space.

The main torch body and Demogorgon head were printed in single color filaments and then painted. The painting process and what was used is detailed in the first part of the assembly video. The light used is a rechargeable LED flame bulb that comes with a remote so you can turn the torch on and off easily. The non 3D printed parts are outlined in the video as well, but also listed below as well as the filaments used for this model.

The tentacles of this model are highly detailed and we strongly recommend to use PLA support material for the interface on these prints. This is talked about in the assembly video as well, but really want to point this out here too. Using the same PLA for the support interface will make it nearly impossible to remove them from the tentacles without breaking them. You could probably use PETG, but this was not tested and of course is your choice.

Since this is the last season of this amazingly written series we thought this would be the perfect time to design this model for everyone to enjoy. This was incredibly fun to design and we really loved how this looked when completed. We really hope you enjoy this model and we thank you for your support on all of our models.

NON 3D Printed Parts:
Acrylic Paint Markers
Acrylic Paint
Acrylic Medium Gloss Gel
CA Glue or Super Glue
Crystal Clear Adhesive
One 10mm X 3MM Magnet, Double Sided Tape, or Velcro for Light and Light Cover
One LED Rechargeable Flame Bulb - Link Below
www.amazon.com/%E3%80%90Upgraded%E3%80%91-Hompavo-Rechargeable-Flameless-Flickering/dp/B0BZRBL9NH/ref=sr_1_6

Filaments Used:
Bambu Lab Slate Gray Sparkle PLA - Torch Body
OVV3D Red/Black Matte PLA - Torch Core, Torch Bottom Cap, Tentacles, Wall Mount, and Tentacle Light Cover
Polymaker Army Beige Matte PLA - Demogorgon Head

Assembly Video Is Below!