The SOUL Torch………
Wielder beware! for one must find the right path in this dungeon, with the torch in hand or be succumb to the flame and join the others and wait for the next brave soul to wield this flame………….
Exit the right path and gain the power of the souls trapped in the flame………..
GOOD LUCK!!!……………….
- It stands about 25 inches, lit with mini waterproof tea lights (3 lights)
- ***there will be 2 print profiles, 1. for the H-Series machines and 2. for the PS2 - A1 plate size***
- the skull print fully by itself then the flame itself prints in 4 parts glue parts one and two together then the top part snaps together for easy removal of the tea lights and flame twist locks to that part. The spine on the H-Series prints in two parts while the smaller plate size prints in 3 parts, glue the spine togehter and you are good to go!
- the holder for the torch is two pieces a bar stopper and the holder itself, on the back there is two holes for screws or two slots for 3M Velcro strips, so you have options on what you prefer.
- I use PETG on the final flame rendition but printed all the tests in PLA translucent, both work great so is on which you prefer or have on hand.
- Look to see if you see any souls trapped in the flame……….
- It's a Fun and easy print and turned out great! I love it and I learned a lot on this build and that is my goal this new year try new things and build out of my comfort zone to really push my art for you guys.
Happy printing!……….. And beware of the flame…………
MembershipInterested in a commercial license? check out my Membership! Boost Me
DeKorverArt
