BMW E36 racing headlight intake

This was made for drifting and street driving. It allows air intake and has an adjustable mount for the turn signal. When you purchase the file, a document is included with information about which headlight it was designed for, and possibly some additional details. The file will be updated over time if I discover anything that can be improved. It is slightly optimized to require less support and is easiest to print with the turn signal side facing down.

you will need screws and heatinsert for the headlight.
i made my own adjusting screws and can help you with them if you contact me via social media :)

 

Ive put a lot of time in to my makings, they were designed for these headlights. They can be found with H1, H4 and H7.

https://www.fc-moto.de/epages/fcm.sf/?channable=018fd5696400393830393338393836bc&ObjectPath=/Shops/10207048/Products/PB-226-091&Locale=sv_SE&gQT=1

I also designed it for M4 heat inserts and indicator to use a M4 hex head screw.

Boost MePlease boost me so i can make more cool stuff!