Milwaukee M12 Charger Mounts Remvable Skadis Screw

Variety of Wall Mounts for my spare Milwaukee M12 Charger for use in more convenient locations.

And more options for mounting on various surfaces.

Note: Using a minimum of 5 perimeters seems to get the best transition on the tops of the "pegs" and works well with no supports on my printer (EXCEPT Skadis Hooks must be printed with supports).

Edit 2023: Added version with 40.88mmoc holes for HSW mounting as well.

Edit 2024: Added more hole versions. 20mm/40mm spacing

Edit 2026: Added 2026 update, Skadis hooks integrated in file, MUST be printed with supports. Not really necessary, but for a small print with supports like this I switch my print speed to Silent Mode, just to make sure there's no failures.

Edit 2026 2: Added Screwless Mount version (w/wo holes) for use with adhesive or foam tape (4 of 30mm x 50mm). Also Screw Mount version for use with two screws.

Edit 2026 3: Added file for Stabilizing Feet for use with all prints to eliminate wobble of charger when mounted.

Enjoy.

Click HERE for some Milwaukee M12 prints you might find useful.