Curtain rod end (Finial)

This ornamental curtain finial brings classical elegance to your window treatments with detailed sculptural elements. The design creates a polished finishing touch at each end of your curtain pole while serving the essential purpose of keeping curtain rings securely in place. The layered, decorative profile adds visual interest and works beautifully with both traditional and contemporary décor.

⚠️ Important Printing Note (READ BEFORE PRINTING!)

This model requires support during printing due to its ornamental design, which means one side of the finial will have visible layer lines and a rougher surface finish. This is completely normal!

Here's the reality:

• The “wall-facing side” (where support was attached) will show layer texture and may not be perfectly smooth.
• The "Front-Facing Side" (facing the room) will look gorgeous and fully polished.

If you're like Inzi and don't mind the "hidden side" because it faces the wall 24/7, then you're good to print straight away! The finial will look absolutely stunning from the front, and nobody will ever see the back.

If you want a perfect finish on all sides, here are some options:

• Post-Process: Light sanding, primer, and paint can make the supported side look seamless.
• Resin Coating: A clear epoxy or resin coat can smooth over imperfections.
• Two-Print Solution: Print two finials and glue the best sides together (experimental but effective for perfectionists!).
• Support-Free Orientation: Rotate the model in your slicer to minimize the area needing support.

Bottom line: This model is designed to be printed as-is and looks stunning. The "imperfect" side is just part of the 3D printing process, and it's completely hidden in real-world use.