A1 AMS 1 top mount

***using this will limit Z height and can crash into the AMS if you aren't careful***

**Limits Z axis height to ~188mm**

when using this, every time you power on the A1 be sure the extruder is close the the bed. When you power on or home the A1, it jogs up the z axis and can hit the AMS mounted on top. 

To assemble the mount you need four m6 x 50mm screws and four m6 nuts. cutting the bolt to length would be nicer but doesn't affect z height. i added a piece of peel-n-stick craft felt from hobby lobby to the inside of the cap that holds onto the top bar of the A1.