Unifi Cloud Gateway Fiber 19" Rack Mount

19-inch rack mount for the Ubiquiti UniFi Cloud Gateway Fiber (UCG-Fiber 30W) and power supply unit.

Designed for a clean, secure rack installation while keeping airflow and serviceability in mind.

 

Boost MeI make these models available for free, and it takes time and materials to design and test them.
If this model helps you, Boosts are greatly appreciated — thank you!

If you’d also like to support my work and buy me a coffee☕
Optional support:
https:/Ko-fi.com/m1k3y2004

 

🔩 Hardware Required

• 6 × M5×10 screws (left/right mount connection)
• 6 × M5 hex nuts (left/right mount connection)
• 4 × M5×16 screws (PSU body to left mount)
• 4 × M3×10 screws (PSU body clips)
• 4 × M3×20 screws (center mount back connection)

Note: Hand-tighten screws only.

 

🖨️ Print Settings

• Rafts: Not required
• Supports: No
• Layer Height: 0.2 mm
• Walls/Perimeters: 4
• Infill: 20% or higher

• Filament: PETG (recommended for heat resistance)

   

Other Related Files

• The right mount without the keystones can be found here: 

  https://makerworld.com/en/models/2215275-my-ucg-fiber-19-rack-left-right-mount-blank.