Dryer Lint Trap Vacuum Attachment

Dryer Lint Trap Vacuum Attachment

Update 2026-02-05 - Extendable and Right Angle Print Profiles

As per many of your requests, I have added an extendable version that can connect/snap together multiple pieces to make whatever length you are looking for. This may be for those who have smaller printer areas, or for those that just need a little extra reach. As well I have made the profile width a bit thinner for those that have a bit tighter vent to squeeze in to :) .

The units snuggly snap together. You will require a bit of force. Once they are connected they should stay together pretty well. However if you are feeling nervous about them disconnecting during use, I have also added filament slots in which you can insert some spare filament and snip it off to create a lock between the two pieces. If you do not plug the holes, it has not effect on the vacuum as the holes pass through independently of the vacuum area. If you feel so inclined, you can even heat seal the two pieces together with a torch or soldering iron along the seam between the two pieces.

As well I have added a right angle attachment for the Dyson Attachment 1, as this was also requested.

Enjoy!

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Original Print Details:

This is a simple attachment for your vacuum cleaner to allow a new extended nozzle for cleaning in those deep/hard to reach places. In particular this model was made for the attachments on the old Dyson Roller Ball units.

Simply screw the attachment adapter in to the nozzle head and then click in to your dyson vacuum. You are ready to clean your lint trap.

Available in P1S print plate size - 250mm

Available in H2D print plate size - 320mm

Easy print and easy assembly:

Step 1 - Assemble nozzle by screwing the threaded pieced together

Step 2 - Attach nozzle to vacuum

Step 3 - Clean you Lint Trap :)

Different vacuum heads can be added by request. They simply screw in to the nozzle with a printed thread so it is easy to modify to new units/nozzles. Let me know, and if you have dimensions or drawings for the vacuum attachment then please share.

Cheers and enjoy!