Samsung Note 10+ (Plus) 3D Case

My wife was always asking me to do a case for her phone, the Samsung Note 10 plus that she refuses to let die. And here is my take on a 3D effect back case, just as she wanted. The effect is visible when light hits the back, creating a 3d circular movement.

Important Instructions: Don't use your own profile, only change your filament type and color. If really want to use your own or if you download only the STL file, you must change settings in the print section, be sure to add 0 (zero) to the bottom shells and 5 top shells and choose 20% infill with Archimedian Spiral type or even Honeycomb if you prefer those Hexagon shapes.

Again! If you don't do that you will get a plain case that i modeled a few years ago! It fits, it's perfect sized but it will be plain!

Careful putting the phone inside the case. It breaks easily when used with more force than needed! You will print it again if you keep forcing it! After the phone is in place, it's sturdy as it should be.

This case is not meant to replace a normal case, it does not offer the same protection as a in store replacement. It fits, it does what is supposed to do but careful with the screen!

As always, if you liked this model and want to check my other models, be my guest and thank you!