Shoe rack filament storage tag

Some basic “shoe rack” filament labels. I have had a few of them snap when putting them in place as I have found that the rods are not all the exact same diameters. I tried to keep the tolerances tight so that the labels do not spin on the rod. It might be worth it to print an extra or possibly use PETG since it has a bit more flexibility. There are some basic labels along with a Blank one. Just use Bambu Slicer to add text and paint it whatever color you want. This should work with a manual filament change too if you can have the slicer stop the print after it does the first layer of the lettering.

FYI: I used 10mm font IMPACT for this, its big and blocky and easy to read and print.

(I have not found a way to keep the orientation of the letters when editing the text so each time I have to center the face plate then center the text then move it off center together to get everything lined up. Does anyone know if you can “lock” the Text_Shape to a specific orientation but still be able to edit it?)