Ultimate Slide Clicker Fidget (Print in Place)

 

This slide clicker fidget provides a tactile feel with 7 satisfying clicks as you slide your finger across it. The clicking mechanism is powered by thin, flexible tabs that bounce back when you bend them. The model is fully print in place, meaning that it works right off the build plate without any assembly or support removal. Taking only 4.48 grams and less than 23 minutes to print, this may just be the perfect little fidget for almost everybody. Give the print a few minutes to cool before using or the tabs may deform and stop working.

Boost MeIf you like this model, please consider boosting it! It helps out a ton :)MembershipWant to sell my 3D printed fidget toys? Become part of my Commercial License Membership program!

Printing Instructions:

1. Prepare the Print Bed
   • Clean the print bed thoroughly with isopropyl alcohol to ensure proper adhesion.A
   • Additional adhesive for the print bed is highly recommended! I suggest using 3D-Lac spray or a glue stick.
      
2. Download the Print Profile
   • Send the pre-configured print profile to your Bambu Lab printer through the Bambu Handy app or Download and open the pre-configured print profile in Bambu Studio.
      
3. Select Your Printing Options
   • Choose your filament type and color.
   • Select your print bed type (e.g., textured or smooth).
   • Confirm your printer settings, ideally for a Bambu Lab printer.
      
4. Start Printing
   • Begin the print job. No supports are necessary.