No AMS required. The black vent covers can be printed with the same filament as the rest of the stand.
Custom supports are included for the wings.
Wings and claws require glueing. I recommend plastic glue, but superglue also works.
The base has a snap-on lid. To release it, use a flat screwdriver on the small tabs.
Vents on the top and bottom provide airflow.
2 stand options (difference is in the eagles)
VENTS ON TOP
VENTS ON BOTTOM
Assembly:
Remove both the levitating disk and the electromagnet from their original housing and place them in the new one. The electromagnet fits inside the stand, and the disk goes into the Apple of Eden bottom.
Snap the lids closed (before shaping the stand lid closed, use some double sided tape to secure the light activating PCB to the underside of the lid)
Glue the part that mirrors the Apple’s top to the Apple’s bottom. Use short filament pieces as alignment pins for precise positioning.
To attach the Apple bottom to the rest of the Apple, use the provided Key. Align the tabs on the bottom with the holes in the Apple, push the bottom in as far as it goes, then turn the Key to the right until it clicks into place. You are done!
RFSworks
