Summary:
A stylish, hard-shell protective case with a classic flip-top mechanism. Designed to fully protect your device from drops and scratches while maintaining full access to the screen, buttons, and Type-C charging port.
Description:
## 💡 Design Concept Why settle for a boring silicon sleeve? This 3D printed case offers robust protection with a satisfying, retro-style flip mechanism. It turns your device into a personalized accessory while keeping it safe from daily wear and tear.
## ✨ Key Features
- Smooth Flip Action: Features a durable hinge mechanism for a satisfying open/close experience.
- Full Protection: Thick, rigid walls (PLA+/PETG recommended) protect against impact, dust, and scratches.
- Precise Cutouts: Designed with exact tolerances for:
- Type-C Charging Port (Charge without removing the case).
- Screen / Display visibility.
- Control Buttons.
- Compatibility: Designed to fit "Classic", "V1", and "V2" bar-style mini devices. (Please verify your specific model dimensions before printing).
## 🛠️ Bill of Materials (BOM) To assemble this case, you will need:
- The Printed Parts: Body + Lid.
- Hinge Hardware: Uses a piece of 1.75mm filament OR a metal pin/wire (e.g., paperclip or M2 screw) for the hinge axis. [Bạn sửa lại phần này tùy theo thiết kế của bạn dùng ốc hay dùng sợi nhựa làm bản lề nhé]
- Glue: CA Glue (Superglue) may be needed if you are using magnets for closure.
## ⚙️ Print Settings
- Material: PLA+, PETG, or ABS (PETG recommended for durability).
- Layer Height: 0.2mm.
- Walls/Perimeters: 3 walls (Recommended for impact resistance).
- Infill: 15-20% Grid/Gyroid.
- Supports: Yes (Likely required for the hinge area and internal overhangs).
- Orientation: Print the body standing up or flat on its back depending on your printer's cooling capabilities.
## ⚠️ Disclaimer
- This is a 3D printable case only. The electronic device shown in photos is for demonstration purposes only and is not included.
Nguyên Anh Custom
