Inspired by the Dulton Double Sided Wall Clock
This model can be mounted on a wall or on an IKEA SKÅDIS pegboard.
For IKEA SKÅDIS mounting, an additional adapter is included in the print files.
Requirements
- 2 standard clock movements
I used clock movements with an 18 mm shaft.
The position of the clock movement can be adjusted using the additional filler included in the 3D print files.
The filler is 4 mm thick by default, but you can modify its thickness to fine-tune the final depth and alignment of the clock. - 3 × M5 × 20 mm bolts
- 3 × M5 inserts or nuts
Optional
- Magnets can be added for extra holding strength, but in my case they were not necessary.
seca
