Piranha Plant Dice Tower (V2)

Printable in multicolor or single-color. Base prints at a 45° angle to improve overhang quality and reduce supports. The top rim and piranha head are a separate piece. Use three clips (my profiles include four of them just in case) to secure the pieces together. It's a very tight fit (to reduce wiggle after it's put together), but it should be able to go together. Once you assemble it, it might not come back apart.

 

This is version two of this model. Improvements include better print quality, more efficient multicolor (especially on an H2D/H2C), taller dice tray (dice rarely bounce out in my testing), larger internals so it fits more dice, improved bounce points that don't block the dice, and a more accurate piranha.

 

 

Boost MePlease leave a boost and review if you enjoyed!

This model was designed by Zammer 3D and posted here on MakerWorld.com under the Standard Digital File License. You can print this for yourself or give printed versions away, but do not sell or trade prints of this model or redistribute the digital files in any way. Thank you for respecting the license and supporting me!

Commercial License and Donations Please check out my Buy My a Coffee page to leave a donation, become a member, or purchase a commercial license.

Happy printing!

-Zeke