Lenovo M90n/M75n Mount
- 2 Piece design
- Cut outs for WiFi antenna
- Screw holes are sized for #8 machine screws
Can be used to wall, under desk, or whatever you heart desires for you Lenovo M90n
Recommended Print Settings:
- 0.2mm layer height using the High Quality preset
- 5 wall loops
- 35% gyroid infill
- Supports are required
- I used auto tree supports in Bambu Studio. I also used Support for PLA for the interface material. Print profile has the settings I used. Supports can be a bit of a pain to remove.
- I used PLA Matte but PETG or your favorite filament will work.
If you use the “One File” STL make sure to split the model into objects in your slicer.
Lummin
