Unicorn Bookmark

You do not need an AMS to change colours. At the layer where you should change colour, change to pause and manually change the colour when the print pauses.

 

Bookmarks need a clean plate to avoid any corners rising.

 

Project: unicorn.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50.64x152.46mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 1.3mm and the Actual Depth is 1.4mm

Filaments Used: I do not know the transmission distances.
    PLA Generic Black  
    PLA Generic Pink  
    PLA Generic Blue  
    PLA Generic White  
This print uses 4 unique filaments

 

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Pink
    At layer #11 (0.96mm) swap to Blue
    At layer #12 (1.04mm) swap to White for the rest.

 

Boost Me