Oculus Quest 2 VR pistol grip - Quest 3 compatible

IMPORTANT: 

1. DO NOT use PLA to print this because it is a brittle material that will easily break. Use PETG or TPU instead.
2. For LEFT HAND, mirror just the GRIP piece.
3. This is for the Oculus Quest 2 or Quest 3 controllers. If you are looking for the Quest 1 version, see here.

Introducing the "Chewey_GLK-17"!

After seeing a couple of pistol grips on the market compatible with the Oculus Quest 2 touch controllers, I want a set for myself to use with Pistol Whip and other shooter VR games on my Quest 2. However, I didn't want to pay $70-90 for a set for both hand controllers, so I decided to just make my own kit.

This is based on the Glock 17 1:1 scaled model by a user name archie73 on thingiverse.
I also used the 3D scanned model of the Oculus Quest 2 touch controller by a user name stevesch on thingiverse. Specifically, the "quest2-touch-R-50k.STL"

The final product may not look as cool as the other designs. But I put a lot of focus on comfort, so I play tested with it a lot and have removed all the jarring uncomfortable bits for a comfortable extended VR session.

Each hand controller needs:

• 1x Grip
• 1x Slide
• 1x Front lower
• 2x Screws

Assembly notes:

• One screw is used to join the Grip with the Front lower. These were separated for ease of printing.
• One screw is used on the side to secure the Slide in place in case it slips off while mid VR session.

NOTE: The grip STL is for the RIGHT hand. Simply mirror it to print for the LEFT hand.

Derivatives and remixes are under Attribution-NonCommercial-ShareAlike, but please also include its original name "Chewey_GLK-17" somewhere on the final design. Please do not monetize on this model. Thanks!

Print instructions

Layer height: 0.2
Infill: 15%
Support: see "Suggested_print_orientation_Chewey_GLK-17_set.3mf"

Refer to "Suggested_print_orientation_Chewey_GLK-17_set.3mf" for print orientation and paint on support using PrusaSlicer.

The grip and front lower should be the same color.