Silica Desiccant Printer Dryer - 1,5h drying P1/X1

Silica Desiccant Printer Dryer - for fast drying using auxiliary part cooling fan. Designed for easy printing - no supports needed, just brim on the top cover to keep it on the build plate.

Tested on P1S - should work on P1/X1 printers.

Parts included:

• Main grid - with lid for easy pouring  
• 4 legs - with thread for easy assembly - keeping optimal airflow
• Top cover  - it have brim so it stays on the build plate - just tear it away
• Funnel - for connection with the auxiliary part cooling fan

All parts easilly fits together - no glue needed

Print from PETG - good heat resistance and no warping. 

The print speeds are reduced to get optimal print results.

Optimal use:

• Pour the silica inside equally
• Place the bed and the dryer so that the funnel is directly on the auxiliary part cooling fan
• Set the bed temperature to 80°C
• Set the auxiliary part cooling fan to 100% and the chamber fan to 10% for optimal airflow

• Close the printer and wait 1,5h - silica will be dry completely 

If you want to dry your silica inside your filament dryer, check out my silica dryer spool HERE

Also if you are sick of the small particles of silica getting everywhere, check my silica sorting container HERE

If you have any feedback just let me know in the comments🙂