BTT 7in Screen Mount for SOVOL SV08 MAX

This is a screen mount for the BIGTREETECH 7in Screen to mount it to the front right corner of the GerGO Top Riser for the Sovol SV08 MAX.

Link to the GerGO Top Riser: https://cults3d.com/:3266096

You will need to print the “Bezel” from Nadir's top hat solution here: https://www.printables.com/model/1394338-sovol-sv08-max-tophat-7-btt-hdmi-v12-display-add-o

You will need 3mm heat set inserts in the housing that goes around the screen.  6 of them (or 4 will suffice).  Then 3mm screws to go through the corner mount into the screen housing.  Mount the screen to the housing with 3mm screws from the outside of the housing and into the screen mounting posts, then mount the enclosure to the new corner.

I suggest using PETG and PLA or HIPS for support interfaces as the supports can be tricky to remove from the screen housing.  I print the screen housing in the orientation as it sits on the plate in the 3mf file.  You could flip it over to make sure the external interfaces look better, but this requires more support material to fill the internal cavity.

I print with 4 walls and 20% grid or gyroid infill.

Keywords for search: BIGTREETECH HDMI7 BIQU BTT Klipper