Demon Slayer, Inosuke Hashibira Bookmark Framed

Adding to the Demon Slayer series:  Inosuke Hashibira is a wild, boar-masked Demon Slayer companion to Tanjiro, known for his aggressive personality, dual jagged swords, and unique Beast Breathing style, developed from being raised by boars in the mountains, granting him superhuman strength, agility, and an acute sense of touch, while beneath his beastly exterior lies a surprisingly beautiful face and a desire for camaraderie. 

Demon Slayer, Inosuke Hashibira Bookmark

Pictures shown are printed in an 0.2mm Nozzle
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Blue Transmission Distance: 4

PLA BambuLab Basic Bambu Green Transmission Distance: 4

PLA BambuLab Basic Jade White Transmission Distance: 4.6

PLA BambuLab Basic Orange Transmission Distance: 7

This print uses 5 unique filaments

Swap Instructions:

Start with Black

At layer (0.96mm) swap to Blue

At layer (1.2mm) swap to Bambu Green

At layer (1.28mm) swap to Jade White

At layer (1.52mm) swap to Black

At layer (1.6mm) swap to Orange

At layer (1.84mm) swap to Jade White for the rest.

To print more than 4 Colors in 1 AMS, Use this sample for this print:

1. Load filaments Black in slot 1, Blue in slot 2, Green in slot 3, and White in slot 4
2. When choosing Orange(the 5th Color), select Slot 2(Blue) as it is the first filament to finish printing
3. After layer 1.2mm, Blue in slot 2 is finished printing and Green in Slot 3 has started printing, swap out the Blue filament for Orange. When it is time for Orange to print, the printer will pull from Slot 2.

This is a five color print. Use this tutorial by Cloudy Nostalgia to print more than 4 colors on 1 AMS.

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away.