Curtain Rod Bracket – Extra Clearance (A1 Mini)

Curtain Rod Bracket – Extra Clearance

This curtain rod bracket was designed to solve a common problem:
most brackets don’t extend far enough from the wall, especially when installing double curtains or when you don’t want to remove an existing curtain setup.

I couldn’t find a design that:

• provided enough wall clearance,
• fit on the Bambu Lab A1 Mini build plate,
• and allowed installing a second curtain without dismantling the previous one.

So I designed this one.

✅ Features

• ✔ Extra wall offset for double curtain setups
• ✔ Compatible with Bambu Lab A1 Mini
• ✔ Strong curved design optimized for FDM printing
• ✔ Clean look with hidden rod retention screw
• ✔ Includes left and right print profiles

Curtain Rod Compatibility

• Compatible with IKEA RÄCKA
• Suitable for rods up to 28 mm diameter

🔩 Hardware Required

Wall mounting:

• 2 × screws Ø4 × 40 mm
• 2 × wall plugs Ø5 mm

Rod retention:

• 1 × screw Ø3 mm × ~20 mm
• Screws directly into the printed part (no insert needed)

🖨️ Printing Notes

• Optimized for strength and durability
• Designed to be printed flat on the bed
• Separate print profiles provided for left and right orientation

🧪 Tested

Installed and tested with a 3-meter curtain rod, using three brackets, supporting a full curtain setup without issues. Really sturdy.

RECOMMENDED PRINT SETTINGS 

Material

• PLA / PLA+ / PETG
  (PETG recommended if exposed to sun/heat)

Nozzle

• 0.4 mm

Layer height

• 0.20 mm

Walls

• 3-4 wall loops (≈ 1.6 mm)

Infill

• 20% Grid or Gyroid minimum

Top / Bottom

• Top layers: 3–4
• Bottom layers: 3

Supports

• ❌ Not required