CHiQ / Changhong TV Replacement Stand - U55H10

Lost your TV legs during a move? I designed these replacement stands specifically for the CHiQ U55H10, though they likely fit other models in the Changhong family that use this specific "kidney-shaped" mounting point.

They provide a solid, low-profile base that feels much sturdier than the original plastic feet.

Hardware Needed

To secure these to your TV, you will need:

• 4x M4 15mm Machine Screws (2 per side).
• I used these zinc-plated bolts from Bunnings, which fit the recessed holes perfectly.

Print Settings

I’ve optimized this for strength and finish. While PLA works, I highly recommend PETG for better long-term durability under the weight of the TV.

• Wall Loops: 4 (Crucial for screw hole strength)
• Infill: 25% (Gyroid recommended)
• Supports: Required (Only for the bolt recess overhang)
• Variable Layer Height: Highly Recommended. Turn this on for the top sections to ensure the curves look smooth and professional.

Assembly Notes

1. Clean out the support material from the bolt holes.
2. Align the "kidney" shape of the stand with the bottom of your TV.
3. Hand-tighten the M4 screws first to ensure they are seated correctly before tightening fully.

If you find this useful, please consider uploading a photo of your print! It really helps the community know which other CHiQ models this fits.