Spinning Filament Swatch Display-Mini

灵感来源于：Spinning Filament Swatch Display - Lifts Swatches 来自 Brad - FTBT 3D - MakerWorld，但我的Voron0.2不能打印他因为他太大了，考虑到可能有别的朋友像我一样没有大尺寸3D打印机，于是我设计了这款Spinning Filament Swatch Display-Mini，但它没有办法容纳下所有的bambu色卡。

The inspiration comes from: 纺丝色板显示器 - 升降机色板 来自 Brad - FTBT 3D - MakerWorld --- Spinning Filament Swatch Display - Lifts Swatches 来自 Brad - FTBT 3D - MakerWorld, but my Voron0.2 can't print it because it's too big. Considering that there might be other friends like me who don't have a large 3D printer, so I designed this Spinning Filament Swatch Display-Mini, but it can't hold all the Bambu Lab filaent swatch.

！！！多色新版本：https://makerworld.com/zh/models/729164#profileId-660704

!!! New multicolor version:https://makerworld.com/zh/models/729164#profileId-660704

打印设置：

• 顶层高度：0.20mm
• 底层高度：自适应或 0.10mm（用于平滑斜坡）
• 顶面和底面：同心
• 倒置打印顶部
• 使用Arachne墙体生成器以获得最佳效果
• 按照设计，它只会顺时针转动

为了得到最好的表现：

• 如果需要，用 220 粒度的砂纸将坡道打磨光滑
• 在底部贴防滑贴，这样底座就不会在转动顶部时旋转

Print Settings:

• Top Layer Height: 0.20mm
• Bottom Layer Height: adaptive or 0.10mm (for smooth ramp)
• Top & Bottom Surface: Concentric
• Print top upside down
• Use Arachne wall generator for best results
• As designed it will only turn clockwise, mirror base to turn counterclockwise

For best turning:

• Sand the ramp smooth with 220 grit sandpaper if needed
• Put rubber feet on the bottom so the base won't spin while turning the top