AAP01 KIT SPORTBACK (AIRSOFT)

This is my third AAP01 kit. As the first ones did, this kit solves most of the problems that you may find in other models, for example, the misalignment and tilt of the hop chamber and barrel has been fixed, and the print marks have been brought to a minimum. This has been done by having to embed the barrel in the exit hole of the front thread, forcing the barrel to maintain a straight trajectory.

 

The kit includes:

3 Frontals

2 Receivers

Muzzle

 

Hardware needed:

1 M5x10mm (For the charging handle)

2 M3x4x3mm insert (For the rear sight)

 

If you find any errors, do not hesitate to contact me and I will try to solve them as soon as possible.

UPDATE 07/02/2025:

- The holes for the rear sight have been updated, so now you can install an M3x4x3mm insert to have better resistance on the rear part.

If you want to sell prints of this model, please, contact me.

 

I recommend using PETG because the demos I've done with PLA have broken the rear sight part in the first or second shoot. With PETG works perfectly.

Boost MeIf you like this model, please leave a boost, it helps a lot!