modular Cable Guide for Desk

Modular Cable Guide for Desks

Available in three different lengths (100, 140, 180) and two different styles:

• standard
  
   

• Mk2 with cable pass-through
  

   

  Measurements for the cable pass-though (same for all sizes):
  

Assembly

• Mount them with 4x40mm wood screws to the underside of your table.
• 1 screw per module is enough*, only the last piece in the chain needs 2 screws.
  *) If you respect the correct assembly direction (see picture below) the following piece supports the previous one.

Printing

• Print in a 45° angle for better stability of the prongs.

• Be aware, that the prongs have to be bent when thicker* cables are installed.

  *) The clearance between the prongs and the underside of the table is 9mm shy. 

•  While PLA works fine for me, you may consider using some filament with better flexibility.