Photography Bounce Board Holder Feet + 1in spacer

My brother requested I create some feet to hold his home-made bounce board for his at home photography studio. This is a simple L bracket with a 1in spacer to accommodate a photography bounce board.

Key notes:

• I've added a 1° inward angle to ‘pinch’ the board at the top
• The dovetail connector is purposefully wider to provide more support to the board
• The dovetail connector is purposefully loose to reduce frustration during disassembly
• The provided settings are more than sufficient for the weight this is supporting

I did aim to cut down on the amount of filament used, however, I didn't want to over engineer or spend a ton of time finding weight savings. If you want to take a stab at redesigning it, please feel free to do so and let me know what you've come up with as I'd love to see what I could have done to be more frugal!

If you need other dovetail inserts, let me know and I can release those as well. I had intentions to create a ‘storage’ piece that wrapped around two brackets but wasn't sure if that was necessary. I'll finish and upload that project if my brother says he wants it.