Brick Star Wars Starship Collection Wall / Skadis

Wall mount and Ikea Skadis mounts for the Legos Star Wars Starship collection.

Update 14/02/26 - There are now 4 versions in each profile, an extra was added for the Venator as it's wings were a bit wider than the rest, so in each of the profiles for wall or skadis mount there are:

• A narrow one for most the ships
• One for the Millennium Falcon (75375) with an adapter to rotate and hold it facing upwards.
• One for the AT AT (75440) which has a much wider base.
• One for the Venator (75441) which sits out a bit wider and at a slightly steeper angle.

To fit, just put the back end of the brick stand in, then tilt forward into place, the base should be a nice snug fit without being too tight, the two tabs at the back will prevent it falling out.

The Narrow version is tilted at 10 degrees to angle the ships forward and the other two are at a shallower 4 degrees, the falcon version was tricky due to the weight of the ship and the original stand being very weak when the weight is not centered over it, this adapter seems to work well keeping it central, I will try and work on different adapters to have it sit horizontally without it breaking the original brick stand.

Prints on all size Bambu printers including the A1 Mini, supports painted on manually so keep the settings in the profiles for best results.

Any feedback welcome, and if you like this model giving it a like and a boost would be appreciated!