Kotobukiya Hand Model Adjustable Stand

This is custom stand made for "Kotobukiya ARTIST SUPPORT ITEM 1/1 Scale Hand Model" The hand itself is on a ball joint allowing 360 rotation along with been attached to a rotating peg allowing for more motion. I made it so i could draw the hand from any angle. 

It does require parts
7 1oz Car/Tire Weights
3.5mm Metal Rods

The weights are to balance the stand from falling due to the hands weight
the metal rods are added to plug into the hand, metal because PLA can't handle the weight 

You will need the pause the print on layer 48 to add weights.

The rods will need to be cut roughly 18mm and glued in to the ball jointed peg

Tools
Some Form of glue ( I used two part expoy, JB Weld)
Something to cut the rods (I used a dremel)