Grim Reaper Hueforge

Project: Grim Reaper
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.33x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Filaments Used:
    #080a0d PLA  Black  Transmission Distance: 0.3
    #e2dedb PLA  White  Transmission Distance: 5
    #4c5f71 PLA  Basic Gray  Transmission Distance: 3
    #55331a PLA  Brown  Transmission Distance: 0.8
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to White
    At layer #10 (0.88mm) swap to Gray
    At layer #16 (1.36mm) swap to Brown
    At layer #22 (1.84mm) swap to Gray
    At layer #24 (2mm) swap to White for the rest.

 

Boost MeWenn dir das Modell gefällt oder dir geholfen hat, freue ich mich sehr über einen kostenlosen Boost. Vielen Dank! 😊