Adhesive Bathroom Towel Bar + Hook (No-Drill)

Upgrade your bathroom or kitchen storage with this modern adhesive towel holder: a long towel bar on the right plus an additional hook on the left—perfect for hand towels, washcloths, loofahs, or small accessories. Clean, minimal design, and no drilling required.

 

Dimensions

• Length: 280 mm

• Height: 50 mm

• Depth: 44 mm

 

Adhesive Mounting

On the back side, there’s a large 0.8 mm deep recessed pocket designed for adhesive strips, so the tape sits flush and seamless for a clean look and strong bond.

Tip: Clean the surface thoroughly (degrease), apply the strips firmly, and press the part on evenly.

 

Print Profiles Included

You get two ready-to-print options:

• Strong profile: 5 walls + 25% Gyroid infill (recommended for maximum durability)

• Fast profile: 3 walls + 15% Gyroid infill (quicker print, still solid)

 

Supports

Supports are required. The included print profiles are set up so supports are placed only on the base plate for easier cleanup and cleaner visible surfaces.

 

Material Recommendation

For best strength and long-term use, I recommend PETG (especially in humid bathrooms). PLA also works, but PETG is the sturdier choice.

 

Boost MeThank you for your support ! :)