Battery Storage

⚠️ This is the original version. Kept for compatibility / reference / existing prints

 A redesigned V2 is available that fixes reported issues.

https://makerworld.com/en/models/2382450-battery-storage-v2#profileId-2609095

I made this design easy to be 3D printed and hold as many AAA & AA  AND Cell batteries as possible.  It should hold around 28 AA Batteries and 32 AAA batteries, 3 x2032 cell and 3x2025 batteries. If anyone needs more or less of those slots, instead of 3 each, to be 6 of one type, let me know.

There are 2 caps that goes on top of the holder, one for AAA and one for AA, it made this way so it descresses the chances that the battery goes on their side when loading it,  is a tight fit, make sure you put one side first and then push the other one, like this:

Here is the tray  for the cell batteries ( 3x 2025 , 3x 2032 ) that can be pulled and pushed as shown( let me know if you want for other type of cell batteries, and i will designed it) :

This is how you load the storage:

It as been added a bump on both of the slots so it lowers the batteries chances to jam on each other

Here is how it works: