H2S - H2D - H2C Printer Maintenance Feet

Description:

Given the weight of these machines, when you need to move or rotate the printer for maintenance, you run the risk of damaging the anti-vibration feet located underneath the printer. So I decided to make these four angled feet that act as slides. They will fit into the corners of the printer, lifting it first from one side and then the other, so that the printer can be moved, rotated, or dragged across the table, without running the risk of damaging the four anti-vibration feet. They will then be removed once maintenance on our printer is complete. The prints were made with Bambu Lab Basic PLA.

 

The Fusion 360 (.f3d) source file is included,
allowing easy modification of dimensions to adapt the holders to different socket sets.

 

Printing Settings

Layer height: 0.20 mm

Profile: Standard

Perimeters: 2 walls

Infill: 15%

 

This model was printed with Bambu Lab PLA Basic in the following colors:

Blue 10601

https://eu.store.bambulab.com/it/products/pla-basic-filament?id=42911327912155 

 

Boost MePer favore, considera un boost, significherebbe molto!