Photo Frame A4 (210 × 297 mm)

Photo Frame A4 (210 × 297 mm)

This is a 3D printed photo frame designed to hold an A4-sized photo (210 × 297 mm).
The frame is made of four separate sides that are connected using snap-in corner connectors. Easy to print and no glue neccesarry.

Assembly instructions:

• The frame uses 4 corner connectors that click securely into the corners.
• I recommend first inserting the corner connectors into the two short sides.
• Then attach the two long sides to the short sides to complete the frame.

For my own build, I added a transparent sheet on the front to protect the photo and a simple piece of cardboard on the back for support.
After placing the photo, front cover, and backing, the frame can be closed using 4 sliding pins. These pins slide into slots in the sides and keep everything securely in place.