January 13, 2026
Description
⭐❤️✨ I used countless hours on this project to make it work and im very proud of the outcome. A BOOST AND A FOLLOW WOULD MEAN VERY MUCH! - Please help me show this project to the world! Thank you! 🤩❤️✨
I've designed this lamp as a cozy bedside lamp and I've also used it in different colors as a table lamp on my office desk. It's made to fit a standard E27 socket with 40mm screw ring. It's designed as a high quality lamp with an unique shape and with everything from rubber feet to an optional holder/clamp for the cord. The small cord holder can be seen under the bottom and is screwed in place with 2 m2x8 screws. The rubber feet are 10mm in diameter.
Everything is press fit and will need no glue. I recommend first putting in the 3 “lampshade holders”. Push them in straight and give them a hard push until they cant go any further. Then you can install the "socket holder" by lining up the small triangle and pushing it in. Everything can be seen assembled on the pictures. As long as you assemble the parts straight you should not be concerned about breaking the parts.
You will need to print 1 of each of my print profiles ("Bottom part" and “Lampshade”)
Feel free to contact me with questions or specific changes to the model.
Commercial license available at Patreon.
License:
Standard Digital File License
LUMÉ STUDIO
