All 10mm 14mm & 18mm Adapters For Bowl Pieces

Although the provided print profile is for PETG, and all adapters have been tested with this profile, please use caution when using these adapters. I've personally been satisfied with the provided PETG adapters, but if you're a heavy smoker who takes back-to-back bowls or plan to use these to make a dab rig, I would recommend printing with a more heat-resistant filament.

 

I created these six adapters so I can use any-sized bowl in any size bong / water pipe! Simply place the adapter first, then your bowl of choice! I've tried to make them as open as possible and as small as possible so they don't get in the way and don't affect airflow. To be more specific, the adapters are:

• 18mm to 14mm
• 18mm to 10mm
• 14mm to 18mm
• 14mm to 10mm
• 10mm to 18mm
• 10mm to 14mm

 

The rest of my stoner gear and uploads can be found here: https://makerworld.com/en/collections/10444921-my-420-stoner-uploads  

Boost MeThank you for checking out my project. I spend a lot of time testing, modeling, and designing silly projects like this one, so if this has helped you, please leave me a boost!