Leg0s Loki scepter

Build Guide: The Scepter

Follow these steps to assemble your scepter. If you run into fitment issues, use the troubleshooting tips below to ensure a solid build.

• Alternative Fit: If the bottom section does not fit correctly with your current mid-piece, try swapping the Mid parts. Reversing or switching these components often solves alignment issues(look at the images).

1. Troubleshooting & Finishing

• If the joint is too loose: Apply a small amount of Gorilla Super Glue or a similar adhesive to the connection point. Hold firmly until set.
• If the joint is too tight: Do not force it. Lightly sand the connecting peg or the interior of the hole using fine-grit sandpaper (220 grit or higher) until the parts slide together smoothly. 

2. Author’s Note

I put a lot of time into refining this design to get the best possible outcome. I’m really happy with how it turned out, and I hope you enjoy the final result!