BambuLab Two-Part Pin / Anstecker (0.2 mm Nozzle)

This pin / badge was intentionally designed as a two-part model to improve strength and long-term durability.
By separating the front design from the back plate, mechanically stressed areas — especially the pin attachment — are kept independent from the visible part. This significantly reduces the risk of breakage and makes the pin more robust for everyday use.

⚠️ Important printing notes:

• A 0.2 mm nozzle is required to achieve the intended level of detail
• Supports are recommended for best print quality and strength

The two-piece construction also allows each part to be printed in the optimal orientation, further increasing the overall stability of the finished pin.

If you like this model, I’m happy to create more pins in this two-part, durable design — feedback is always welcome 😊

 

This pin was designed to be used with standard metal pin backs, like the ones shown here: https://share.temu.com/7j8ii1tAg9B

Boost Mefi you like this two-part pin design and the level of detail, a boost would be greatly appreciated. It helps support future pin designs and improvements — thank you! 🙌