Dragon/Mermaid Scale Textiles

This is a dragon scale model for printing with mesh, so you can sew it into anything!

You will need to use power mesh, (other mesh will rip)  PLA or ABS works best with this. There is already a pre-set pause about ~4 layers in, the build plate side is meant to be the top (so you can use a holographic build plate, and so that the top is thicker than the bottom side of the mesh), when it pauses you will need magnets,(or tape works fine too) to secure the mesh to the already half-printed scales, and then un-pause the print, to bind the print to the mesh, 50% speed works best, as the other speeds are too fast in my preference. When you are putting multiple together, I printed an extra set of scales, without mesh, and sewed the two (or however many you want) pieces together and in the space between glue the extra scales onto the mesh, so that it looks like a continuous pattern. (I use e6000)

 Dimensions h~2mm w~15mm l~25mm

 

Add a fantastical touch to your next magical  costume!

 

If you have any problems with this or need settings changed/Help let me know in the comments and I will Help/Fix it as soon as possible

 

 

Boost Meplease support this model for free!! all you need is a boost token!
Boost me to help me release future models! Thank You!