Low Profile Stand for Blue Snowball

• An ultra low profile stand for the Blue Snowball stand.
• 5/8"-27 mount for the mic.
• Just enough clearance to fully tilt the microphone on the screw.
• 70mm diameter base ensures the microphone won't tip or roll while still being a small footprint and low profile on your desk. Like a sturdy shadow.

Print Settings

Rafts:

No

Supports:

No

Resolution:
Recommend you use as fine a resolution as you can to maximize thread accuracy, as the screw is 5/8"-27.

Infill:

10% infill is fine. 20% will make it slightly stronger if you want.

Filament:  PLA Blue pictured, recommended you print in a colour that matches your microphone.
Printed at my local library so filament brand is unknown, but any PLA should be fine.

Overall print weight should be ~8g.

Post-Printing

Paint

Taped off the screw and painted the base black to match the microphone. 

To ensure the threads fit your microphone well it is essential you tape it off if you are painting the base.

2 coats of acrylic matte black.
 

Tags: Audio, Gadgets, Microphones, etc.