Catan Cities & Knight Box + English Version

Make sure to check which version of Catan you own before printing! This is for the EU wooden version! 

A custom made model for the the Expension Cities and Knight for Catan.
  

Latch need to be printed 2 times
Walls and Knights need to be printed 4 times
Box for the pieces need to be printed 4 times
Metropole needs to be printed 3 times (Original will fit as well) 
Pirate also include because the original does not fit 

(I printed the pirate and metropole with 100% infill for some weight recommended!! Trust me :) ) 

The “Catan C&K Box Bin Support Layer” is a layer between the bottom of the box and the bins. So they rest on it. This can be placed loose on top of the bottom layer (see pictures) 

The “Catan C&K Box Main Inlay” needs support on the little corners. just the tiniest bit. 
Mine printed not as a hole but a foldable form so you can fit it better in the box and glue it later
 

Hardware You need   
8mm x 2mm magnets (8x)
30mm M3 Bolts (6x)