Walther PDP OWB Holster

 

Boost MeI appreciate the downloads and  boosts!  That's what keeps me designing and churning out these designs.  

 

 This is an OWB holster for the Walther PDP, PDP Pro and PDP F-Series.  The holster has a Safariland bolt pattern to be attached to all compatible platforms.  This includes my parametric holster hanger setup that I also already have published.  

 

UPDATE: Per a few different users, this holster also apparently works on several Canik models, including the TP9, TP9 SA, TP9 SFL, METE SFT and Elite SC.

 

  There are six profiles.

4.6" Standard Right Hand

4.6" Standard Left Hand

Long Version Right hand, for the 5.1, a comped 4.6, or threaded barrel.

Long Version Left hand, for the 5.1, a comped 4.6, or threaded barrel.

Long Version Right hand, for the 5.1, a comped 4.6, or threaded barrel with Low-Cut, for use in competition like USPSA.

Long Version Left hand, for the 5.1, a comped 4.6, or threaded barrel with Low-Cut, for use in competition like USPSA.

 

  To assemble, use #8-32 hardware, same as Safariland.  Lengths will vary depending on what you are mounting the holster to.  The holster is designed for you to be able to press the appropriate nut into the recess, and be held there.  You will need:

 

3x regular #8-32 nuts

1x nylock #8-32 nut.  This is for the tension.

3x #8-32 screws, either hex, button head, whatever.  This depends on what you are attaching to.  

1x martini or button head #8-32 screw.  This is for the tension.

 

  To assemble, press the 3 regular nuts into the recesses inside the holster.  You can then use the 3 screws to attach the holster to whatever.  Be sure that the lengths are correct, so that the threads of the screws are not extending into the holster and inhibiting your gun or scratching it.  Take the remaining nylock nut and martini screw.  Press the nut into the hex recess of the tensioner and thread the screw in.  It's best for you to place the unloaded handgun and light into the holster and tension until desired tightness is achieved.

 

  Print in PETG for best results in outdoor work.  

 

 

  Roadmap for the future is to convert this design into an IWB EDC, and then start working through lights.  I have access to TLR-7, TLR-9 and TLR-1 (soon).  Next holster will be a Glock 17 with TLR-1.  I also have a hip-level belt mount in testing that these holsters can all be mounted to as well.  

 

Thanks for all the support.  Feel free to offer comments, critique, etc.  

 

1/22/2026 UPDATE:

By popular request, a Belt Mount system is now available for Safariland bolt patterned holsters, including this one. 

 

2/24/2026 UPDATE:

An IWB Version of this holster is now available here.