Storage system for DUPLO rails.

Boost MeIf you like this model, you can support me. It will help me in my future work. Thank you.

At a friend's request, I created a storage system for DUPLO tracks.

 

Each rail consists of two parts that connect by sliding into each other.

The assembled rail is approximately 54.5 cm long. 

 

There are 7 slots on the assembled rail for inserting tracks, and each slot can hold 5 tracks.

 

The model was primarily designed for storing straight rails.  All fields can be used for hanging rails when using straight rails.

 

 You will find two print profiles here. The first was created for the X1C printer and other printers with a corresponding print area, and the second was created for the H2D printer.  

 

The original intention was to attach it to the side of the workbench, but it can also be attached to the wall.

Screw for mounting to the side panel of the table. 

I used classic wood screws with countersunk heads.

3.5x16mm screw (bottom of the rail)
4.5x80mm screw (top of the rail)

 

If you decide to mount it on the wall, the screws must be longer depending on the dowels used.