January 19, 2026
Description
Free for personal printing use only.
Exclusive projects and commercial license available at Patreon.com/StrataPrints — your support keeps new designs coming! Check out the Endeavor print below, available EXCLUSIVELY on Patreon!
Project: Mirko.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 188.03x235mm in size
You may print at higher layer heights below the Base Thickness of 0.96mm
The Max allowed Thickness is 2.96mm and the Actual Thickness is 2.96mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#5e43b7 PLA BambuLab Purple Transmission Distance: 5
#6f5034 PLA BambuLab Basic Cocoa Brown Transmission Distance: 0.4
#808080 PLA BambuLab Basic Gray Transmission Distance: 0.1
#f99963 PLA BambuLab Matte Mandarin Orange Transmission Distance: 3
#fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4
#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Purple
At layer #16 (1.36mm) swap to Cocoa Brown
At layer #21 (1.76mm) swap to Gray
At layer #28 (2.32mm) swap to Mandarin Orange
At layer #30 (2.48mm) swap to Sunflower Yellow
Border Only Colors from here until the end.
At layer #32 (2.64mm) swap to Ivory White
This slider is set higher than the mesh depth. It is not affecting your final mesh. Consider removing it.
At layer #40 (3.28mm) swap to Black for the rest.
License:
Standard Digital File License
Strata Prints
